 |
|
|
$ smartctl -t short /dev/sda
$ smartctl -t long /dev/sda
$ smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.7.7-200.fc24.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: S2WEZ0GR
LU WWN Device Id: 5 000c50 04aef2543
Firmware Version: 0001SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Nov 28 19:44:41 2016 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 136) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 091 067 006 Pre-fail Always - 155686835
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 085 085 020 Old_age Always - 15495
5 Reallocated_Sector_Ct 0x0033 012 012 036 Pre-fail Always FAILING_NOW 1815
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 29935035
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 14686
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1670
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 65535
188 Command_Timeout 0x0032 099 093 000 Old_age Always - 193276477500
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 068 053 045 Old_age Always - 32 (Min/Max 31/32)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 27
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3
193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 35389
194 Temperature_Celsius 0x0022 032 047 000 Old_age Always - 32 (0 18 0 0 0)
195 Hardware_ECC_Recovered 0x001a 047 042 000 Old_age Always - 155686835
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 91
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 91
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 14971 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 14971 occurred at disk power-on lifetime: 14686 hours ( 611 days + 22 hours )
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ba 22 61 00 Error: UNC at LBA = 0x006122ba = 6365882
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 22 61 40 00 00:07:18.095 READ FPDMA QUEUED
25 03 08 78 08 60 40 00 00:07:17.805 READ DMA EXT
ef 03 46 78 08 60 00 00 00:07:17.756 SET FEATURES [Set transfer mode]
ef 03 0c 78 08 60 00 00 00:07:17.756 SET FEATURES [Set transfer mode]
ec 08 70 78 08 60 00 00 00:07:17.755 IDENTIFY DEVICE
Error 14970 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ba 22 61 00 Error: UNC at LBA = 0x006122ba = 6365882
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 0b 61 40 00 00:01:41.053 READ FPDMA QUEUED
60 00 00 00 0a 61 40 00 00:01:41.017 READ FPDMA QUEUED
60 00 00 00 04 61 40 00 00:01:39.673 READ FPDMA QUEUED
60 00 00 00 f4 60 40 00 00:01:17.130 READ FPDMA QUEUED
60 00 00 00 f3 60 40 00 00:01:12.492 READ FPDMA QUEUED
Error 14969 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ba 22 61 00 Error: UNC at LBA = 0x006122ba = 6365882
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 80 80 22 61 40 00 00:01:42.971 READ DMA EXT
25 03 80 00 22 61 40 00 00:01:42.894 READ DMA EXT
25 03 02 30 22 61 40 00 00:01:42.875 READ DMA EXT
25 03 01 00 00 00 40 00 00:01:42.760 READ DMA EXT
25 03 80 80 22 61 40 00 00:01:40.285 READ DMA EXT
Error 14968 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ba 22 61 00 Error: UNC at LBA = 0x006122ba = 6365882
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 80 80 22 61 40 00 00:01:40.285 READ DMA EXT
25 03 80 00 22 61 40 00 00:01:40.207 READ DMA EXT
25 03 02 2e 22 61 40 00 00:01:40.108 READ DMA EXT
25 03 80 80 22 61 40 00 00:01:37.633 READ DMA EXT
25 03 80 00 22 61 40 00 00:01:37.555 READ DMA EXT
Error 14967 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ba 22 61 00 Error: UNC at LBA = 0x006122ba = 6365882
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 03 80 80 22 61 40 00 00:01:37.633 READ DMA EXT
25 03 80 00 22 61 40 00 00:01:37.555 READ DMA EXT
25 03 02 2c 22 61 40 00 00:01:37.466 READ DMA EXT
25 03 80 80 22 61 40 00 00:01:35.179 READ DMA EXT
25 03 80 00 22 61 40 00 00:01:35.101 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: unknown failure 90% 14686 0
# 2 Short offline Completed: unknown failure 90% 14686 0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|