首頁 繪圖設計 工作閒聊 比賽活動 美術討論 標籤 圖片
SmartCtl Examples: A failed SATA2 Seagate 500GB Disk




Type(Type) 2016/11/28 19:56

SmartCtl Examples: A failed SATA2 Seagate 500GB Disk

A good example of a failing Seagate SATA2 OEM 500GB disk,which was only up about 2 years. No big stress on it, just treat it as external ISO image backup disk.SMARTctrl messages that proved the SATA disk is failed or likely failling:
(1) Bad blocks reallocat fulled!e.g.5 Reallocated_Sector_Ct 0x0033 012 012 036 Pre-fail Always FAILING_NOW 1815(2) UNC Error found => UNC errors denotes "UNCorrectable Errors"e.g. 40 51 00 ba 22 61 00 Error: UNC at LBA = 0x006122ba = 6365882(3) Short and Long S.M.A.R.T Self-Test all completed w/ "Unknown failure"e.g.SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Extended offline Completed: unknown failure 90% 14686 0# 2 Short offline Completed: unknown failure 90% 14686 0



More detailed of smartctl example on a failing disk

代碼:
$ smartctl -t short /dev/sda$ smartctl -t long  /dev/sda$ smartctl -a /dev/sdasmartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.7.7-200.fc24.x86_64] (local build)Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Model Family:     Seagate Momentus 5400.6Device Model:     ST9500325ASSerial Number:    S2WEZ0GRLU WWN Device Id: 5 000c50 04aef2543Firmware Version: 0001SDM1User Capacity:    500,107,862,016 bytes [500 GB]Sector Size:      512 bytes logical/physicalRotation Rate:    5400 rpmDevice is:        In smartctl database [for details use: -P show]ATA Version is:   ATA8-ACS T13/1699-D revision 4SATA Version is:  SATA 2.6, 3.0 Gb/sLocal Time is:    Mon Nov 28 19:44:41 2016 CSTSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: FAILED!Drive failure expected in less than 24 hours. SAVE ALL DATA.See vendor-specific Attribute list for failed Attributes.General SMART Values:Offline data collection status:  (0x00) Offline data collection activity                                        was never started.                                        Auto Offline Data Collection: Disabled.Self-test execution status:      (  73) The previous self-test completed having                                        a test element that failed and the test                                        element that failed is not known.Total time to complete Offlinedata collection:                (    0) seconds.Offline data collectioncapabilities:                    (0x73) SMART execute Offline immediate.                                        Auto Offline data collection on/off support.                                        Suspend Offline collection upon new                                        command.                                        No Offline surface scan supported.                                        Self-test supported.                                        Conveyance Self-test supported.                                        Selective Self-test supported.SMART capabilities:            (0x0003) Saves SMART data before entering                                        power-saving mode.                                        Supports SMART auto save timer.Error logging capability:        (0x01) Error logging supported.                                        General Purpose Logging supported.Short self-test routinerecommended polling time:        (   1) minutes.Extended self-test routinerecommended polling time:        ( 136) minutes.Conveyance self-test routinerecommended polling time:        (   2) minutes.SCT capabilities:              (0x103b) SCT Status supported.                                        SCT Error Recovery Control supported.                                        SCT Feature Control supported.                                        SCT Data Table supported.SMART Attributes Data Structure revision number: 10Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  1 Raw_Read_Error_Rate     0x000f   091   067   006    Pre-fail  Always       -       155686835  3 Spin_Up_Time            0x0003   099   098   000    Pre-fail  Always       -       0  4 Start_Stop_Count        0x0032   085   085   020    Old_age   Always       -       15495  5 Reallocated_Sector_Ct   0x0033   012   012   036    Pre-fail  Always   FAILING_NOW 1815  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       29935035  9 Power_On_Hours          0x0032   084   084   000    Old_age   Always       -       14686 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1670184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       65535188 Command_Timeout         0x0032   099   093   000    Old_age   Always       -       193276477500189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0190 Airflow_Temperature_Cel 0x0022   068   053   045    Old_age   Always       -       32 (Min/Max 31/32)191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       27192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       3193 Load_Cycle_Count        0x0032   083   083   000    Old_age   Always       -       35389194 Temperature_Celsius     0x0022   032   047   000    Old_age   Always       -       32 (0 18 0 0 0)195 Hardware_ECC_Recovered  0x001a   047   042   000    Old_age   Always       -       155686835197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       91198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       91199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0SMART Error Log Version: 1ATA Error Count: 14971 (device log contains only the most recent five errors)        CR = Command Register [HEX]        FR = Features Register [HEX]        SC = Sector Count Register [HEX]        SN = Sector Number Register [HEX]        CL = Cylinder Low Register [HEX]        CH = Cylinder High Register [HEX]        DH = Device/Head Register [HEX]        DC = Device Command Register [HEX]        ER = Error register [HEX]        ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 14971 occurred at disk power-on lifetime: 14686 hours ( 611 days + 22 hours )  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  40 51 00 ba 22 61 00  Error: UNC at LBA = 0x006122ba = 6365882  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  60 00 00 00 22 61 40 00      00:07:18.095  READ FPDMA QUEUED  25 03 08 78 08 60 40 00      00:07:17.805  READ DMA EXT  ef 03 46 78 08 60 00 00      00:07:17.756  SET FEATURES [Set transfer mode]  ef 03 0c 78 08 60 00 00      00:07:17.756  SET FEATURES [Set transfer mode]  ec 08 70 78 08 60 00 00      00:07:17.755  IDENTIFY DEVICEError 14970 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  40 51 00 ba 22 61 00  Error: UNC at LBA = 0x006122ba = 6365882  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  60 00 00 00 0b 61 40 00      00:01:41.053  READ FPDMA QUEUED  60 00 00 00 0a 61 40 00      00:01:41.017  READ FPDMA QUEUED  60 00 00 00 04 61 40 00      00:01:39.673  READ FPDMA QUEUED  60 00 00 00 f4 60 40 00      00:01:17.130  READ FPDMA QUEUED  60 00 00 00 f3 60 40 00      00:01:12.492  READ FPDMA QUEUEDError 14969 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  40 51 00 ba 22 61 00  Error: UNC at LBA = 0x006122ba = 6365882  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  25 03 80 80 22 61 40 00      00:01:42.971  READ DMA EXT  25 03 80 00 22 61 40 00      00:01:42.894  READ DMA EXT  25 03 02 30 22 61 40 00      00:01:42.875  READ DMA EXT  25 03 01 00 00 00 40 00      00:01:42.760  READ DMA EXT  25 03 80 80 22 61 40 00      00:01:40.285  READ DMA EXTError 14968 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  40 51 00 ba 22 61 00  Error: UNC at LBA = 0x006122ba = 6365882  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  25 03 80 80 22 61 40 00      00:01:40.285  READ DMA EXT  25 03 80 00 22 61 40 00      00:01:40.207  READ DMA EXT  25 03 02 2e 22 61 40 00      00:01:40.108  READ DMA EXT  25 03 80 80 22 61 40 00      00:01:37.633  READ DMA EXT  25 03 80 00 22 61 40 00      00:01:37.555  READ DMA EXTError 14967 occurred at disk power-on lifetime: 14685 hours ( 611 days + 21 hours )  When the command that caused the error occurred, the device was active or idle.  After command completion occurred, registers were:  ER ST SC SN CL CH DH  -- -- -- -- -- -- --  40 51 00 ba 22 61 00  Error: UNC at LBA = 0x006122ba = 6365882  Commands leading to the command that caused the error were:  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name  -- -- -- -- -- -- -- --  ----------------  --------------------  25 03 80 80 22 61 40 00      00:01:37.633  READ DMA EXT  25 03 80 00 22 61 40 00      00:01:37.555  READ DMA EXT  25 03 02 2c 22 61 40 00      00:01:37.466  READ DMA EXT  25 03 80 80 22 61 40 00      00:01:35.179  READ DMA EXT  25 03 80 00 22 61 40 00      00:01:35.101  READ DMA EXTSMART Self-test log structure revision number 1Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error# 1  Extended offline    Completed: unknown failure    90%     14686         0# 2  Short offline       Completed: unknown failure    90%     14686         0SMART Selective self-test log data structure revision number 1 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS    1        0        0  Not_testing    2        0        0  Not_testing    3        0        0  Not_testing    4        0        0  Not_testing    5        0        0  Not_testingSelective self-test flags (0x0):  After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.


(1,907 views)
[更多討論] 討論區 Windows, Linux, Perl, PHP, C/C++, Driver, Web 理論、應用、硬體、軟體


"SmartCtl Examples: A failed SATA2 Seagate 500GB Disk" 傳統頁面(電腦版)

首頁 繪圖設計 工作閒聊 比賽活動 美術討論 標籤 圖片
傳統桌面版
© Vovo2000.com Mobile Version 小哈手機版 2019